in my 10 years experience of sewing, i hadn’t got the chance to sew Finnish design fabrics other than the big brands like Marimekko, Finlayson’s Moomin, and Nanso. to be honest, i didn’t even know much about Finnish ‘indie’ design fabric brands that much, until some colleagues of mine started introducing them to me some time last year. and what a wonderful alternative they are to the other bigger brands!
i had wanted to get my hands on them ever since, but compared to the fabrics i usually buy & sew, these Finnish ones are naturally quite pricey. for example, i usually spend about 5€-10€ for a single fabric for one project, but these fabrics cost around 24€ per meter. so i wanted to be careful when choosing the fabrics to buy from these brands, and not end up regretting the purchase.
luckily for me, some months ago there was an arts and crafts event called Ommel where these brands sold their fabrics for cheaper prices. this event was also where i got to learn about & test the sewing machine i ended up getting (didn’t buy it from the event itself, though). in short, this event was my perfect opportunity to get deeper into my passion of sewing.
after some hours of deliberating, i decided to get 2 fabrics from Verson Puoti. the other one is to be posted later when i have made something out of it, but this first one is called Sienisato.why i decided to get this one is actually another story probably worth telling.
just before this event, i celebrated my 10th year anniversary at my work place. my colleagues had secretly prepared surprise gifts for me, and one of them was a skirt made out of a Marimekko fabric. ❤
i really love that skirt and want to use it everyday, however i found that i only have plain t-shirts to wear with it, either black or white. so i was looking for another special fabric that i can use together with that skirt, and thought that black and white print would be lovely.
but you can be the judge of that! even though i haven’t been using crazy prints that much lately, i do still like to mix prints and colours. now with this Marimekko skirt, i can go all out!
this piece of fabric that i got was cotton jersey, sized 70 cm long and about 160 cm wide. it’s wider than most jerseys, so at first i thought i would still be left with a small piece for some other project. but alas, the first sleeve piece i cut was much too narrow that my arm couldn’t fit it, so i had to cut new ones.
since i promised to really make use of my new sewing machine, i tested different stitches for this project. for the sleeves, since they are still quite tight even after i cut new pieces, i used an elastic stitch (left picture above) which is not really straight but also not really ziggy zaggy, more like a combo of these two. for the added detail, i decided to make straps from black cotton jersey and used decorative stitches on it.
i had worried that the decorative stitches would be uneven when i do it to a stretchy material, but since i folded the fabrics twice (so that it’s 3-layered) i suppose it helped to stabilize it, and i would say my machine did a pretty damn good job! (can you tell how much i love my new machine already?)
for this project, i used the good ol’ Ottobre design magazine pattern that i have used numerous times on different types of dresses and tops. since i am still learning on how to make my own patterns, i did this one the ‘idiot’ way: first i traced the pattern and cut the fabric as they were supposed to be (minus the neck pieces), and then i sewed the sleeves and back & front pieces together, and then cut the neckline so that it would be slightly off-shoulder. then, i added the straps.
as you can also probably guess, i love the result so much! i’m just so proud of myself and my sewing machine for being able to put the lovely print design to a good use. maybe it’s because of these magic mushrooms! also, i’m happy to be able to support these local indie textile designers, i do hope i don’t disappoint them by making this top out of their magical print.